If you need assistance, you're in the right place!
Hi guys, I’m switching to shadow Alpha since the USB driver got some issues on shadow’s stable version. However, when I launch the Shadow Alpha, I was asked to allow the “ELTIMA LLC” software to complete installation via Security & Privacy. I checked my Security & Privacy but could not find the ELTIMA software anywhere. I ended up giving Shadow Alpha full disk access but it stil did not work. Does anyone know exactly where to unblock ELTIMA LLC installation? Thank you in advance!Mac OS: 10.15.7 Catalina
Anyone running a Thrustmaster TMX Pro steering wheel setup through to Shadow? I am able to install the drivers and updates for the wheel on the laptop and it works as expected. However, the Shadow device manager shows a yellow exclamation for the usb device. I have tried installing directx 9c, making sure the usb peripheral is checked and different patterns of booting and rebooting with no luck. The same driver is installed on both machines as far as i can tell.Windows tells me it is the best driver, there is nothing in Windows updates, and when selected other drivers from a compatibility list the same friendly exclamation mark is there. I have 852.5 up / 41.8 down / 7 ping.I hear there is a third party usb porter you can get but an not seeing more money as a solution. Anyone have this trouble with this wheel? Is it working for you or is this a Shadow dirty little secret?
Hi guys. I have the shadow ghost and using the microphone via the aux input. The microphone sound is so low in the stable version that a lot of people can’t understand me. In the beta version the volume is fixed, but then their is an other problem.. there is a cracking sound all the time. So with all the other problems i read about the microphone.. it isn’t fixed yet :(.
Hi Shadow Community,I have been enjoying greatly playing Halo: MCC, on Shadow Boost (the standard package), however, I frequently get drops from 60 to 45-50fps for no reason (say once/twice a minute) and I’d like to figure out why. The host system:Microsoft Surface Go 2m3-8100y8gb RAMIntel UHD 615Internet connection: Comcast cable 200+mbs connected by ethernetLatest Intel Graphics driversMSI Afterburner shows no strain on host GPU or CPU (no higher than 30% across the board) The Shadow System:25mbs (tried both h264 and h265)No packet lossConsistant 46ms lag (variance is less than 1ms)MSI Afterburner (for stats only) shows: No strain on CPU or GPU (approx 30% across the Board) and 60fps constant.Latest Quadro driversChicago data centreAny thoughts on improving frame transfer consistency? Thanks in advance, Chris
Hello there!It looks like there was an incident at the Texas DC today and you guys are reporting that you’ve put a fix in place and are monitoring it.My Shadow PC in the Texas DC has an incredibly slow connection to the Internet, resulting in the rest of my overall performance being unusable.Just wanted to put this out there for the team that’s monitoring the situation. A fix to this would be awesome! Thanks! Usage StatsSpeed Test (on Shadow PC)Significantly lower than normal
Hello, how are you, this will be brief, on January 5 I contracted the shadow boost pre - order, and I had to wait for the delivery day, January 14, 2021.But we are already finishing that day and I have not yet received the activation or confirmation email, etc.I know that account activations are from Monday to Thursday, and January 14 is Thursday and I wonder why the activation does not arrive.Otherwise all good, that was my question, Greetings to all the #TeamShadow
Question for someone, so I installed shadow on my nvidia shield, I load shadow, sign in, shows my games, Destiny 2, and COD. When I click on a game using my gamepad it loads the game and shows the desktop. It doesn't load the game but I hear the music playing and have no way to maximize the window because I am using a gamepad. I can hear the music of the game and see it down below but I have no way to pull up the window via controller. Also I load call of duty, it loads shadow windows desktop but just sits there. It seems to me it should load the game and not just drop me to windows. Any ideas? Any ideas why it's not loading the game and taking me to the shadow desktop rather then loading the game?
Application type Ghost Shadow Client Version Official Local device CPU ghost Local device GPU ghost Datacenter location Amsterdam Connection speed 500 mbit Description I have buy a new 1440p (60 hz) monitor and have some weird stutter in the game/stream. My game FPS and shadow FPS are 60 but I have a micro stutter with movements. I have my ghost connected with a hdmi cable (high speed) I order today a 2.1 ultra speed cable maybe that works. Is a 2.1 cable backwards comitable to hdmi 2.0 and 1.4?I have the stutter only at 1440p resolution when I set it back to 1080 then I have no stutter.I have the problem only with my ghost when I connect the screen on my laptop with a display cable and set the resolution to 1440p its all fine and smooth. ghost have a hdmi 2.0 my monitor have a hdmi 1.4 hdmi is a ultraspeed hdmi a solution or no different?otherwiseI will connect my ghost to my display port but I find no solution for hdmi to display port only from display port to hdmi (wr
So overall I'm very happy with my shadow service. I know the windows client gets a lot more love then the android client. I was wondering if anyone was having the same issue as me. I have a shield tv pro. I'm running the latest beta client which fixed the resolution changing bug for me. And running shadow ultra. So 1080p everything runs buttery smooth. When I go 4k/60hz with this setup there seems to be both some mouse input lag / skipping as well as visual lag / skipping. I mainly play world of tanks, but notice it in other games as well. I'm running at 70mbps and my latency is very low so I don't think it's an internet connection issue. Is anyone else experiencing this on their Shield device running 4k?
So I just got my shadow and I’m using a Dell Laptop I enabled my USB Peripherals to use my laptops built in mic/webcam but it is not picking it up only shadows devices any help would be much appreciated I have tested it on my device and it works just fine, but as soon as I get into my shadow it does not register that its working.
Can anyone clearly state/confirm that Synapse 3 will not work or identify a device that’s connected to the host computer? I just bought a new Razer mouse hoping to be able set settings through Synapse 3 but it won’t pick up neither my keyboard nor mouse. They don’t show up as devices I can forward either.
Logitech MX Master Bluetooth Mouse isn’t registering buttons 3 and 4. I’m using Overwatch to test this. Furthermore, Caps Lock doesn’t register on my Logitech ERGO K860. Both mouse and keyboard are connected to my MacBook Pro (13”, 2019, Two Thunderbolt 3 Ports) running macOS Big Sur 11.2.1. I’m running the macOS Shadow app v. 1.8.7.
This was touched upon in this question, but not fully answered WindowsOfficial versionIntel i7-3770SGeForce GTX 1060 6GBParis (210mbps / 35upload, 23 ping, 2ms Jitter)Monitor Dell 144hz (also tried on an older monitor with the same problem)Some games run perfectly (Destiny 2, Fortnite) others like Dayz and Deadside, State of Decay 2 have graphical issues - but only on my PC version of Shadow. When my character moves in game the resolution gets blurry, then it refocuses when I stand still. This is not an issue on the same games on Shadow Ipad or Google TV app, and not an issue in all games.I have tweaked settings, resolutions, after effects, low bandwidth mode etc with no improvement. My question is really why do these games look great on Ipad, and crap on my PC? I prefer to play on my pc, and this issue puts me off buying new AA titles if I can’t be sure if the stream will look good on my PC?My PC isn’t wired directly, but wired via a mesh system with 200ish. Of course the TV and I
Ive been tinkering with this for a few hrs and thought it might be easier to just ask. Is it possible to run a 3rd party VC app like handygamepad from my android phone wile playing on my HP Chromebook falco running zorin OS ? I dont mind wasd it but would like options . game fallout 76 on game pass PC. Thank you in advance
Hello I am new to shadow and to the forums so far I am really liking my system. I got my 3 screen readers jaws fore windows nvda and windows narator running with out any issues except fore 1 and I can not seem to figure out how to get around this. when ever I go to launch the shadow instance and it is up and running when ever I try to do the shortcut to go to the minue to select usb devices to connect eg usb hard drives I can not find the minue. I tried with my screen readers locally and on the shadow machine with no luck is there a easier way to get the devices connected, and to have it remember your choice fore next time? the only other thing I can think of and I don’t want to have to do this each time I want to use my usb hard drive on my shadow instance but try to find some one sited to help. I will not allways have access to some one sited to help me get that part set up can any one suggest anything? I am at a loss on how to get around this thanks Hank
I just had my referral code AND discount deactivated for unknowingly abusing a rule. Shared it in an oculus quest VR group, even people I play with and it was deactivated without warning regardless of the fact that 70% of my referrals are friends and family. So my advice is only share your code via private messaging to friends and family. I was frustrated by this because on the referral page it literally says "X NUMBER OF REFERRALS UNTIL FREE SHADOW!!" but nothing about rules of abuse.
Hello, I had a question I am a very big fan of Fallout New Vegas especially when it comes to modding, I tried installing the net frame 2.0 3.0 and wanted to know if such was possible or if it is a breach of contract between your services and myself. For some reason I'm giving an error but I want to know if it's something enabled by your company. I must apologize in advance for a did try to install net frame 2.0 and it did not work I thought maybe it was Windows Defender I attempted that and it did not work as well. However after that I may know more attempts to try to install however after that I may know more attempts to try to install past the firewall and I am asking for some advice or for clarity to the situation
Sorry everyone, but we need to maintain order on these “question of the week” threads. If your question isn’t about ARM processors, either ask it during the stream when it opens up to free questions, which is totally okay, or create a post about it on the forums, which is also totally okay. If you post it here, it’s just going to get moved out of the thread anyway. Sorry. Sorry but this advice is garbage. We get ignored by the community managers since summer 2020...it is ridiculous! Opening a new thread will just end up in an empty thread that gets ignored.“ask it during the stream” hahaha funny...guess you haven’t seen the live stream where Luc sat there shamefully ignoring the dozens of people asking about Ultra/Infinite. They just picked up random questions and simply tried to ignore it...Ridiculous how you treat YOUR customers.
Login to the community
Social LoginLogin with OpenIdConnect
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.