Video, Audio, Start Issues and much more. The community is here to help!
- 1,821 Topics
- 5,446 Replies
After trying Shadow for the first time on macOS with my Bluetooth 8Bitdo SN30 Pro controller, I noticed massive input lag in games in any mode other than XInput mode. Be sure to start the controller by holding X+start for a second or two to have it pair in this way. You will also be able to avoid XInput translation in Shadow settings. Overall this eliminates ~400-500ms of lag.
try to open an account. I used my main email to register but card got declined. Then I used my second Email to register it worked but I ended up being charged twice. first time is 9.99 USD due to I was register my main email account, I used a promo code. so it only charged me for 9.99 but It still says declined on the web page. second time was due to my successful register so thats fine.
The X-Box controller does not work with the Shadow iOS. It does work when I am using Steam Link however. So I know this is a problem with Shadow. Is this a known error? I’ve mentioned this to Shadow support but no word from them.Is there a community work around until Shadow gets this fixed?
I have trouble starting my Shadow whenever I use my normal internet connection. My connection is fine but I keep getting this error… unless if I use a VPN located in Georgia or Alabama because I live in Northwestern Florida.I tried all the solutions and the error almost always comes back after whenever I turn off my computer or set it to sleep mode. I haven’t found any other solution unless if I connect via VPN. i hope I didn’t have to use a VPN but I almost always have more latency and constant lag and stuttering unless if I use one to connect to Shadow.
Hello,I am currently using a 2017 MacBook Pro to run my Shadow Boost. Unfortunately I made the mistake of updating to Big Sur. My problem/concern is that I will not be able to use my new Fanatec racing wheel for two reasons.My new Big Sur version MacBook will not allow USB forwarding of the Fanatec wheel. I hear that VirtualHere is a great solution if I downgrade my OS to 10.14 (VirtualHere supports up to 10.14) Fanatec only offers drivers for Windows. So I can’t install the drivers on my Mac and I would only be able to do so my Shadow. I’m worried this will affect/not allow me to use my wheel if the software is not on my Mac which the wheel is plugged into.My current hope is to revert my Mac to 10.14 and use VirtualHere. But I’m worried that I won’t get the any/total use out of my brand new racing setup if I don’t have the drivers installed on my Mac.Another option would be to install Boot Camp on my Mac. If I do this, I theoretically could install Fanatec Drivers and have the USB be
As per title, It appears the latest Rockstar update has broke RDR2 on Shadow. I have been able to play with no issues via the Rockstar launcher on Boost since its day 1 launch, however the game now quits to desktop when attempting to start either online or solo. I have been through all the suggestions on the various online forums to no avail.I am able to run the game if i install on one the kids home PC’s (Ryzen CPU’s, one with a RTX 2060 and the other with a GTX 1070). A quick check on /r/ShadowPC shows I'm not alone, not checked on the Discord as i’m not a fan at all of how its used. I’m now convinced its to do with the shadow hardware.Has ANY boost RDR2 gotten it to work since the last update and if so how?Has ANY Shadow staff been able to run it since last update on the BOOST configuration? again if so how and any chance you could advise the communities, be it here or /r/ShadowPC.
My Ghost seems to be limited in the video output its capable of on my ultrawide display. Its running at 3840x1080@60hz but won’t run at 5120x1440@60hz (the display’s native resolution) despite the larger res still being less pixels than the officially supported 4kUHD@60hz spec. I’ve tried enabling h.265 and setting custom resolutions on the desktop but no luck. Any suggestions on how to get it working would be great or failing that, suggestions on the cheapest hardware that will run the app at my native resolution
Hello,I am rather new to Shadow, but one thing I would really like to use more often is the ability to start games directly from the Android launcher. I have only connected a game pad to my android devices and trying to start a game once booted into Windows is cumbersome…I also tried booting into Steam Big Picture Mode, but that sometimes gives me D3D error messages at start.Since there is this feature already shown on android to start games, I would like to know how to populate them? I have installed 4-5 games, but none of them are shown in the android launcher.I tried the option to re-load the list, but that did not work out yet. regardsneo
I am using Shadow infinite in Europe so my Datacenter would be Gravelines. Recently I get a lot of Error L-203 which indicates to many users. Problem is, that I do not see any problems on the status page regardless of me trying to connect for about 20 Minutes without any luck. What can i do about this problems. And if its a capacity problem, why isn´t it shown on the status page?
Can anyone shed some light on how one goes about getting synapse to recognize a razer item installed. I can use it as intended but it doesn't show on the equipment in synapse on shadowtech. The item I'm working with is the tartarus pro.
Application type (Windows/Mac/Mobile/etc.): Windows Shadow Client Version (Official/Beta/Alpha): Official/Beta (I’ve tried both) Local device CPU: AMD Ryzen 5 3500U Local device GPU: AMD Radeon Vega 8 Graphics Datacenter location (check status.shadow.tech): New York Connection speed (Datacenter speed tests EU: Paris | AMS or US: CA | TX |CH | NY): 165MB/s Download, 6.29 Upload, 25.71 Ping, 12.06 Jitter Description of issue: When i enter fullscreen mode on my Shadow PC (Either using the quick settings option, or by doing Win + Alt + F) my monitor appears to turn off for a few seconds, and then turn back on. It will stay on for a second or two, then turn back off for a few seconds. If I use an older monitor I have, it works fine. If I do fullscreen on my actual Laptops screen, it works fine. I have a HP Touchscreen laptop (I have tried enabling the touchscreen in shadow settings as well). The other monitor that i’ve tested and fullscreen works on is a 27inch, 720P I believe.
Hi, I have some issues with my additionnal storage, here my configuration : Windows Application Official version Local device CPU : Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz 2.40 GHz Local device GPU : Nvidia GeForce 660M Datacenter location : Paris Connection speed (Paris) : 51Mb/s Description of issue : First of all, 2 days ago, my shadow freezes and crashed all the shadow with many problems to reconnect. I realized it was my additionnal storage which caused the issue each time i tried to write on it. I wanted to erase anything on it and formate but it never ends and freezes all the shadow. Now, my additionnal storage is not usable at all. Other: Date when problem appeared : 10/12/2020 Did you take any action(s) which could have created this problem? If so, what? Maybe installation of Cyberpunk? Do you recall any action(s) you took after it happened? Uninstall Steam, change directory, erase additional storage Disk Do you use a VPN and/or antivirus? No Thank you
This whole last weekend I have been getting an error that there are too many people trying to use shadow and it takes me 10-15 minutes of retrying to get logged in. I don't remember anything stating that you are oversubscribed in the dc and we may not be able to access our pc during peak hours. Happened again tonight and then 5 minutes in and it kicked me out and I had to start the whole process over again of waiting to access. I pay for the ability to access my shadow pc when I have time which is very limited and when I have to spend a quarter of that time just logging in the whole value prop becomes pretty slim. I hope you are not prioritizing those lucky enough to get the ultra and unlimited to the detriment of the rest of us peasants on the economy service.
Every time I open up shadow to start streaming it won’t show anything on the tab, it’s just grey, but if I click around I can press some buttons.Grey Shadow LauncherI tried un-installing and re-installing a bunch of times in different ways but it didn’t fix it. I tried digging around the files to see if I could find anything and I found a thing that opened up shadow and a console showing a bunch of errorsErrors?I haven’t been able to find anyone with the same problem but I don’t think I looked up the right stuff. Hope someone knows how to fix this.
I'm having near constant issues with my shield tv and shadow's changing resolution solution.Basically when a game tries to change the resolution at launch it creates a loop right now. Shadows resolutions changer appears to fail, it tries again and again. Also most times I can't change the resolution of the stream after it's started from android. UnlessI change the resolution with my laptop first..... Then resume my shadow from android with the correct resolution settings to avoid the Android resolution switcher. The same applies for games, say a game launches in 1080p, if I know this I can change the settings in the app and it magically works again, just at 1080p. If I don't know the resolution it starts on I have to guess, to many wrong guesses and the app hangs at starting stream. Again I can pull out my laptop and work around this, but it can make launching a games extremely painful sometimes.
Login to the community
Social LoginLogin with OpenIdConnect
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.