Video, Audio, Start Issues and much more. The community is here to help!
- 1,876 Topics
- 5,565 Replies
Mouse don't move on Mac because of the border issue
I recently found one issue related to the cursor/mouse capture in the Mac shadow client. When I am playing the game, I found sometimes when I am holding the left key on the mouse, I can not move at all and even can’t press keys on the keyboard. And the reason I found on my several Macs is, in the cursor locked mode, when my cursor is touching the window borader (even in the full screen mode), the cursor will naturally change to the resizing mouse, and if I press, hold the left click right now and then move, whole keys will be stuck and cannot move. I tried to contact the support team, but they said they don’t have such issue. So I post here to see whether you guys met the same issue and have any solutions. (Have tried disable the trackpad, enable AEserver, they both don’t work)
Shadow Internet Much slower than usual, causing lag
i just logged back into shadow after about 2 hours. to notice that when I went into a game, it was lagging. not studdering lag, but actual lag. i thought it might've been my laptop, but when I did a speed check on the actual shadow pc. it read 130MB Per Second. which is way lower than then 1GB that that usually have. i am on the texas datacenter, can someone help me
Need Help getting ReWASD to work with Shadow Virtual Controller (IOS)
Good morning! I'm having issues with ReWASD on my shadow PC I use on my Ipad. I'm using the actual virtual controller on Shadow, not a physical one. I installed everything and created a config (specifically Dual Universe), but the game won't recognize the inputs.I haven't tried other games yet, but can anyone share their experiences or guides on how to make this work? Thank you in advance.
Tip: Pair 8Bitdo SN30 Pro Controller in XInput Mode to Avoid Lag
After trying Shadow for the first time on macOS with my Bluetooth 8Bitdo SN30 Pro controller, I noticed massive input lag in games in any mode other than XInput mode. Be sure to start the controller by holding X+start for a second or two to have it pair in this way. You will also be able to avoid XInput translation in Shadow settings. Overall this eliminates ~400-500ms of lag.
Got charged twice on my debit card
try to open an account. I used my main email to register but card got declined. Then I used my second Email to register it worked but I ended up being charged twice. first time is 9.99 USD due to I was register my main email account, I used a promo code. so it only charged me for 9.99 but It still says declined on the web page. second time was due to my successful register so thats fine.
X-Box Home Button Not Working
The X-Box controller does not work with the Shadow iOS. It does work when I am using Steam Link however. So I know this is a problem with Shadow. Is this a known error? I’ve mentioned this to Shadow support but no word from them.Is there a community work around until Shadow gets this fixed?
Persistent V-100 error
I have trouble starting my Shadow whenever I use my normal internet connection. My connection is fine but I keep getting this error… unless if I use a VPN located in Georgia or Alabama because I live in Northwestern Florida.I tried all the solutions and the error almost always comes back after whenever I turn off my computer or set it to sleep mode. I haven’t found any other solution unless if I connect via VPN. i hope I didn’t have to use a VPN but I almost always have more latency and constant lag and stuttering unless if I use one to connect to Shadow.
Mac, Shadoe, Fanatec Racing Wheel
Hello,I am currently using a 2017 MacBook Pro to run my Shadow Boost. Unfortunately I made the mistake of updating to Big Sur. My problem/concern is that I will not be able to use my new Fanatec racing wheel for two reasons.My new Big Sur version MacBook will not allow USB forwarding of the Fanatec wheel. I hear that VirtualHere is a great solution if I downgrade my OS to 10.14 (VirtualHere supports up to 10.14) Fanatec only offers drivers for Windows. So I can’t install the drivers on my Mac and I would only be able to do so my Shadow. I’m worried this will affect/not allow me to use my wheel if the software is not on my Mac which the wheel is plugged into.My current hope is to revert my Mac to 10.14 and use VirtualHere. But I’m worried that I won’t get the any/total use out of my brand new racing setup if I don’t have the drivers installed on my Mac.Another option would be to install Boot Camp on my Mac. If I do this, I theoretically could install Fanatec Drivers and have the USB be
RDR2 no longer working after last update.
As per title, It appears the latest Rockstar update has broke RDR2 on Shadow. I have been able to play with no issues via the Rockstar launcher on Boost since its day 1 launch, however the game now quits to desktop when attempting to start either online or solo. I have been through all the suggestions on the various online forums to no avail.I am able to run the game if i install on one the kids home PC’s (Ryzen CPU’s, one with a RTX 2060 and the other with a GTX 1070). A quick check on /r/ShadowPC shows I'm not alone, not checked on the Discord as i’m not a fan at all of how its used. I’m now convinced its to do with the shadow hardware.Has ANY boost RDR2 gotten it to work since the last update and if so how?Has ANY Shadow staff been able to run it since last update on the BOOST configuration? again if so how and any chance you could advise the communities, be it here or /r/ShadowPC.
Shadow Ghost - Ultrawide
My Ghost seems to be limited in the video output its capable of on my ultrawide display. Its running at 3840x1080@60hz but won’t run at 5120x1440@60hz (the display’s native resolution) despite the larger res still being less pixels than the officially supported 4kUHD@60hz spec. I’ve tried enabling h.265 and setting custom resolutions on the desktop but no luck. Any suggestions on how to get it working would be great or failing that, suggestions on the cheapest hardware that will run the app at my native resolution
Android Launcher - shows no games
Hello,I am rather new to Shadow, but one thing I would really like to use more often is the ability to start games directly from the Android launcher. I have only connected a game pad to my android devices and trying to start a game once booted into Windows is cumbersome…I also tried booting into Steam Big Picture Mode, but that sometimes gives me D3D error messages at start.Since there is this feature already shown on android to start games, I would like to know how to populate them? I have installed 4-5 games, but none of them are shown in the android launcher.I tried the option to re-load the list, but that did not work out yet. regardsneo
I am using Shadow infinite in Europe so my Datacenter would be Gravelines. Recently I get a lot of Error L-203 which indicates to many users. Problem is, that I do not see any problems on the status page regardless of me trying to connect for about 20 Minutes without any luck. What can i do about this problems. And if its a capacity problem, why isn´t it shown on the status page?
How to get razer synapse to recognize my installed razer equipment?
Can anyone shed some light on how one goes about getting synapse to recognize a razer item installed. I can use it as intended but it doesn't show on the equipment in synapse on shadowtech. The item I'm working with is the tartarus pro.
Shadow turns off monitor on fullscreen mode
Application type (Windows/Mac/Mobile/etc.): Windows Shadow Client Version (Official/Beta/Alpha): Official/Beta (I’ve tried both) Local device CPU: AMD Ryzen 5 3500U Local device GPU: AMD Radeon Vega 8 Graphics Datacenter location (check status.shadow.tech): New York Connection speed (Datacenter speed tests EU: Paris | AMS or US: CA | TX |CH | NY): 165MB/s Download, 6.29 Upload, 25.71 Ping, 12.06 Jitter Description of issue: When i enter fullscreen mode on my Shadow PC (Either using the quick settings option, or by doing Win + Alt + F) my monitor appears to turn off for a few seconds, and then turn back on. It will stay on for a second or two, then turn back off for a few seconds. If I use an older monitor I have, it works fine. If I do fullscreen on my actual Laptops screen, it works fine. I have a HP Touchscreen laptop (I have tried enabling the touchscreen in shadow settings as well). The other monitor that i’ve tested and fullscreen works on is a 27inch, 720P I believe.
Already have an account? Login
Social LoginLogin with OpenIdConnect
Login to the community
Social LoginLogin with OpenIdConnect
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.